iDRAC7 - No Mouse or Keyboard

We recently had an emergency issue with a client system and had issues with the iDRAC7 remote control features. We put iDRAC cards in all of our servers for exactly this scenario where there is an unknown issue and we might need to power cycle the system.

We were able to log into the iDRAC7 web console with no issues. However, on the summary screen it was not showing status for the power supplies. Also, if I tried to browse the disk status, it was indicating the no disks or controllers could be seen.

Fortunately, the fix was pretty easy. Just restart the iDRAC card. To do this, on the Summary screen, in the Quick Launch Tasks, click Reset iDRAC as shown below. This does not reset the configuration of the iDRAC, it just restarts the card.

Comments

Post a Comment

Popular posts from this blog

Remove OEMDRV Drive from Dell Server

I recently installed a Dell Server by using the Lifecycle Controller. This system uses a wizard to help with the installation of the operating system. In this case, I was installing Windows Server 2008 R2 to replace an existing Exchange 2010 server. As part of the installation, an OEMDRV USB drive is created by the Lifecycle Controller that contains the drivers used during OS installation. OS installation went well, but I ran into an issue afterwards. The OEMDRV drive was using E:, which I needed for my Exchange data. When you go into computer management, OEMDRV shows as a removable drive. However, you cannot change the drive letter or eject OEMDRV. By default the Lifecycle controller removes this drive after 18 hours, but I didn't want to wait that long. To force OEMDRV to be removed earlier, restart the server and press F10 to enter the Lifecycle Controller configuration. Then exit the Lifecycle Controller and reboot again. You don't need to make any changes in the configurat
Read more

Stop SBS from Shutting Down

We are currently migrating a client from SBS 2003 to SBS 2008. We've joined the new computer to the the domain, and run DCpromo on the SBS 2003 computer to remove the DC status. However, after seven days, SBS 2003 will start giving an error stating that it needs to be a DC and will shut down every 60 minutes ( http://support.microsoft.com/kb/555087 )! We need another few days to work on the migration. The Microsoft recommended solution for this is to insert disc 1, run setup, and remove the SBS 2003 component. This will leave a plain Win 2003 server without the shutdown issue. However, when I attempted to do this, setup errored out indicating that I was trying to upgrade to an older version which was not possible. Removing service packs may have worked, but here is a faster work around taken from a guy named Alan ( http://social.microsoft.com/Forums/en-US/whssoftware/thread/af4fc3b4-bb50-4c5e-b09a-72ef2c3ac687 ) I've found a slightly more elegant solution to this problem rather
Read more

Expired Microsoft Exchange Server Auth Certificate

Image
When you install your first Exchange Server 2013 or Exchange Server 2016 server, a certificate with the friendly name Microsoft Exchange Server Auth Certificate is created. This certificate is self-signed and used for OAuth authentication between applications such as Exchange Server and SharePoint. However, it is also used for hybrid deployments between on-premises Exchange Server and Exchange Online. This certificate is unique because it is installed on all of your Exchange servers. The subject for the certificate is "CN=Microsoft Exchange Server Auth Certificate" and does not contain any SAN names with references to specific servers. It also has a 5-year lifetime. Which is just long enough for everyone to forget about it. I suspect that this certificate is due to expire in many organizations soon. Today I got a call from an organization with the following symptoms: Outlook clients were slow to start Outlook clients were not displaying the user's calendar Outlook clients
Read more